In-house course Safety, Environment and Energy Transition

Safety in Hot Work, Welding, and Cutting Operations (Hot Work Permit)

For your team · date and location to be agreed

  • 20 to 40 hours
  • On site or online
  • For your team

About the course

This course teaches safe welding and cutting practices to prevent fires and explosions, in compliance with international standards.

Objectives

Train participants to identify hazards and apply safe protocols in hot work, protecting personnel and facilities.

Who should attend

Welders, maintenance technicians, safety supervisors and industrial operators.

Course base program

Reference program: before delivery we adjust content, depth and duration with your team.

  1. Module 1

    Hazards and permits

    Hot work, standards, work permits, ignition sources and procedures.

    • Introduction to hot work and its hazards
    • Safety standards (OSHA, NFPA)
    • Hot work permits
    • Control of ignition sources in industrial areas
    • Safety procedures before, during and after the job
  2. Module 2

    Control at the work front

    PPE, cylinders, ventilation, fire prevention and spark protection.

    • Proper use of PPE in hot work
    • Safe handling and storage of gas cylinders
    • Ventilation and fume control in the work area
    • Fire and explosion prevention
    • Protection against sparks and spatter
  3. Module 3

    Emergencies and practice

    Confined spaces, emergencies, cases, equipment inspection and a workshop.

    • Hot work hazards in confined spaces
    • Emergency procedures for incidents
    • Real cases and lessons learned
    • Inspection and maintenance of welding equipment
    • Hands-on hot work safety workshop

How an in-house course works

  1. Needs reviewWe talk with your technical team and HR about objectives, profiles and the level of the group.
  2. Program adjustmentWe adapt modules, exercises and duration to your operation, using your company data and cases if you wish.
  3. DeliveryAt your facilities or live online, on the dates you choose, for your team only.
  4. Close-outParticipant assessment, certificates and a final report for your company.

Looking for an open date to enroll individually? See the open course calendar →

WhatsApp