In-house courses
Learning maps by discipline
Each map brings together the courses of one discipline, organized by technical area and competency level. Choose the discipline, explore the map and request any course in-house for your team.
- 1Choose the discipline
- 2Explore the full course map
- 3Request the in-house course in one minute
13 disciplines from upstream to downstream
Tap a discipline to see its full mapEach map is a reference proposal: courses, hours and levels are adjusted to the roles and experience of your team.
Full catalog
All in-house courses
386 courses in 12 areas. Search by topic or filter by area.
Geosciences
- 2D and 3D Seismic Data Acquisition
- Advanced Carbonate Reservoir Characterization
- Advanced Formation Evaluation
- Advanced Log Interpretation
- Advanced Petrophysics
- Applied Geostatistics for Exploration
- Applied Structural Geology for Exploration and Development
- AVO (Amplitude vs. Offset) and Seismic Inversion
- Basic Log Interpretation
- Data Science and AI for Petrophysics with Python
- Data Science for Geophysics
- Deepwater Environments and Tectonics
- Exploration of Tight and Shale Reservoirs
- Geochemistry for Exploration and Development
- Geological Characterization of Clastic and Carbonate Reservoirs
- Geological Mapping
- Geomechanics
- Geophysics Fundamentals for Geoscientists
- Geosteering for Conventional, Shale and Tight Reservoirs
- Gravity and Magnetotellurics
- Image Logs and Fracture Analysis
- Integration of Logs, Cores and Capillarity
- Introduction to the Oil and Gas Industry
- Log Data Quality Control
- Mentoring: Maturing an Exploration Prospect
- Mentoring: Supervised Petrophysical Evaluation
- Mentoring: Supervised Shifts as Wellsite Geologist
- Microseismic
- Non-Seismic Geophysics
- Operations Geology
- Passive Seismic Monitoring
- Petroleum Systems Analysis and Modeling
- Petrophysical Evaluation of Unconventional Reservoirs
- Prospect Evaluation: Risk and Volumes
- Reservoir Geomodeling
- Rock Physics and Seismic Reservoir Characterization
- Sedimentary Basin Analysis
- Sedimentological Depositional Systems
- Seismic Attributes
- Seismic Characterization for Shale Plays
- Seismic Geomorphology and Seismic Stratigraphy
- Seismic Interpretation
- Seismic Inversion and Quantitative Interpretation
- Seismic Mapping
- Seismic Processing
- Sequence Stratigraphy and Sedimentary Models
- Structural Interpretation of Seismic Reflection Data
- Structural Styles
- Time-to-Depth Conversion and Depth Imaging
- Trap and Seal Analysis
Reservoir Engineering
- Advanced Petroleum Economics
- Advanced Reservoir Engineering
- Advanced Well Test Interpretation
- Basic Petrophysics
- Basic Reservoir Engineering
- Basic Reservoir Geology
- Case Studies and Field Work in Shale and Tight Gas Reservoirs
- Chemical EOR
- Compositional Simulation, Assisted History Matching and Uncertainty
- Cores and Basic Rock Properties
- Data Science for Reservoir Engineers: Basic
- Decline Curve Analysis
- Digital Twins and Industry 4.0 Technologies in Reservoirs
- Drilling and Well Construction in Shale and Tight Gas Reservoirs
- Economics and Project Management in Shale and Tight Gas Reservoirs
- Enhanced Oil Recovery (EOR) Methods
- Environment, Emissions and Energy Transition for Subsurface Professionals
- Evaluation and Modeling of Gas Condensate Fields
- Exploration and Resource Assessment in Shale and Tight Gas Reservoirs
- Field Development Project Management
- Flow in Porous Media and Drive Mechanisms
- Formation Testers and Pressure Gradients (FTA)
- Gas Injection and Gravity Drainage
- Gas Reservoir Engineering
- Geology and Characterization of Shale and Tight Gas Reservoirs
- Geomechanics in Shale and Tight Gas Reservoirs
- Hydraulic Stimulation in Shale and Tight Gas Reservoirs
- Integrated Reservoir Analysis
- Introduction to Fluid Analysis
- Introduction to Machine Learning in Reservoirs
- Introduction to Unconventional Reservoirs
- Introduction to Well Stimulation
- Material Balance in Hydrocarbon Reservoirs
- Mentoring: Supervised Integrated Reservoir Study
- Multiphase Flow, Coning and Critical Rates
- Nanoscale Phenomena and Digital Rock Physics
- Naturally Fractured Reservoirs
- Operational and Technological Aspects of Shale and Tight Gas Reservoirs
- Principles of Secondary Recovery and Fractional Flow
- Project Evaluation: Risk and Uncertainty
- PTA – RTA – Production Data Analysis
- PVT – EOS
- Rate Transient Analysis (RTA)
- Recovery Optimization in Mature Fields
- Reserves Estimation, Audit and Certification
- Reservoir and Production Engineering in Shale and Tight Gas Reservoirs
- Reservoir Management
- Reservoir Simulation
- Resource and Reserve Estimation
- Rock Typing and Multiscale Data Integration
- Safety, Environment, and Sustainability in Shale and Tight Gas Reservoirs
- Shale and Tight Gas Reservoirs: Productivity
- Simulation of Fractured and Unconventional Reservoirs
- Technical Communication and Working in Integrated Teams
- Trends and Recent Advances in Shale and Tight Gas Reservoirs
- Water Injection Management and Optimization
- Water Shut Off and Conformance
- Well Test Interpretation
Drilling and Completion
- Artificial Intelligence and Big Data Applied to Drilling
- Basic Drilling
- Casing Design
- Completion and Fracturing Data: Acquisition, Quality and KPIs
- Completion Design Optimization with Production Data
- Completion Fluids and Brines
- Cost Optimization in Drilling Projects
- Crisis Management and Well Emergency Response
- Deep Water Drilling
- Deepwater Well Completion
- Deepwater Well Supervision
- Directional and Horizontal Drilling
- Drill String Design
- Drilling AFE
- Drilling Fluids
- Drilling Geomechanics
- Drilling Hydraulics
- Drilling in Unconventional Reservoirs (Shale, Tight Oil & Gas)
- Drilling Practices – Advanced
- Drilling Project Management
- Drilling Rig Operations: Components and Maneuvers
- Environmental and Emissions Management in Well Construction
- Extended Reach Drilling (ERD)
- Fishing Operations and Downhole Contingencies
- Formation Damage: Mechanisms, Diagnosis and Prevention
- Formation Evaluation Program: Logging, Cores and DST
- Frac Pack and High Rate Water Pack
- Frac Water, Sand and Logistics
- Fracture Pressure Analysis and Diagnostics
- Fracturing Operations Supervision and QA/QC
- Geology and Petrophysics Applied to the Well
- Geothermal Drilling
- HPHT: Planning, Well Design and Engineering
- Introduction to Company Man
- Introduction to Drilling Safety and Well Control
- Latent Cause Analysis: Learning from Drilling Failures
- Managed Lost Time Workshop
- Managed Pressure Drilling (MPD)
- Mentoring for Drilling Teams
- Mentoring: Accompanied Pad Supervision in Completion
- Mentoring: Supervised Shifts as Company Man
- Multilateral Wells
- Pipe Sticking
- Planning of Complex Interventions and Snubbing
- Plug Drill-out with Coiled Tubing and Wellbore Cleanout
- Pore Pressure and Borehole Stability
- Primary Cementing
- Real-Time Well Evaluation
- Recompletion and Refracturing
- Slurry Design, Centralization and Displacement Simulation
- Solids Control and Drilling Waste Management
- Special Problems in Drilling
- Special Well Control Scenarios: Underground Blowout and Relief Well
- Strategic Planning and Decision-Making in Drilling
- Torque, Drag, Buckling, Vibrations and Casing Wear
- Unconventional Completion Design
- Underbalanced Drilling
- Well Control Equipment: BOP, Accumulator and Testing
- Well Control – Supervisor Level
- Well Design and Engineering (Workshop-Based Course)
- Well Planning and Rig Equipment Selection
- Well Site Operation Management
- Wellheads and Production Trees: Selection and Design
- Wellsite Safety, Work Permits and Simultaneous Operations
Production
- Artificial Lift in Unconventional Horizontal Wells
- Artificial Lift Systems
- Candidate Selection and Well Repair Programs
- Carbon Capture and Storage (CCS) in Production
- Cement Evaluation and Remedial Cementing
- Contractor Management, OPEX and Production Reporting
- Daily Production Management: Losses and Prioritization
- Data Science for Production Engineering
- Downhole Equipment, Packers and Materials Selection
- Electric Submersible Pumping
- Electric Submersible Pumping Failure Analysis
- Environmental Management, Venting and Emissions in Production
- Failure Analysis and Reliability of Production Equipment
- Flow Assurance in Production and Transportation Systems
- Fundamentals of Coiled Tubing and Intervention Units
- Fundamentals of Hydraulic Fracturing
- Fundamentals of Production Chemistry
- Fundamentals of Well Completion
- Gas Lift
- Gas Well Liquid Unloading (Deliquification)
- Geology and Petrophysics for Production Engineers
- Heavy and Extra-Heavy Oil Production
- Intermittent Gas Lift
- Introduction to Production Operations
- IPM with the Petex Suite (Prosper, GAP, MBAL)
- Leadership, Communication and Human Factors in Operations
- Mentoring: Supervised Shifts as Field Engineer
- Nodal Analysis
- Perforating: Design and Execution
- Process Control in Field Facilities
- Production Control
- Production Engineering for Shale Gas Reservoirs
- Production Logging and Cased-Hole Surveillance
- Progressive Cavity Pumping
- Safety in Production Facilities and Work Permits
- Sand Control: Selection, Design and Execution
- Sand Production, Erosion and Solids Management
- Subsea Production Systems (Offshore)
- Sucker Rod Pumping
- Waterflooding Surveillance
- Well Abandonment and Regulatory Compliance
- Well Control in Intervention and Workover
- Well Integrity and Barrier Management
- Well Interventions with Pulling and Workover Rigs
- Well Productivity
- Wireline Operations and Cased-Hole Logging
Facilities, Pipelines and Gas
- Compressor Station Optimization
- Corrosion
- Crude Oil Treatment
- Cryogenic Processes and Liquids Recovery
- Deep Water Installation Technology (Offshore)
- Diagnosing Off-Spec Plants
- Field Chemical Treatment
- Fluid Properties for Facilities
- Gas Processing and Conditioning
- Hydrates: Prevention and Inhibition
- Hydrocarbon Measurement According to API Standards
- Introduction to Natural Gas Processing
- Laboratory Techniques and Practices
- Liquid Separation Principles
- Mentoring: Supervised Plant Operation
- Mercury Removal
- Molecular Sieve Dehydration
- Multiphase Flow
- Natural Gas Economics
- Offshore Installation Manager (Offshore)
- Oil and Gas Transportation
- Pipeline Integrity Management
- Produced Water Management and Reuse
- Produced Water Treatment
- Project Management for Facilities
- Pumps and Compressors
- Reading and Interpreting Process Drawings
- Reciprocating Compressor Operation and Maintenance
- Renewable Energy Integration in Surface Facilities
- Subsea Pipeline Design (Offshore)
- Surface Production Facilities
Process Engineering
- Advanced Control and Real-Time Optimization
- Distillation and Absorption Columns
- Dynamic Process Simulation
- Energy Efficiency in Plants
- Heat Exchangers and Fired Heaters
- Material and Energy Balances
- Mentoring: Plant Optimization Study
- Process Instrumentation
- Process Plant Troubleshooting
- Relief and Flare Systems
- Steady-State Process Simulation
Midstream
- Mentoring: Managing a Transport System
- Pipeline Cathodic Protection
- Pipeline Defect Assessment and Repair
- Pipeline Design per ASME B31.4 and B31.8
- Pipeline Operations and Control Center (SCADA)
- Product Quality and Commercial Specifications
- Storage Tanks
- Terminal and Loading Rack Operations
- Underground Gas Storage and LNG
Refining
- Amines and Sulfur Recovery
- Atmospheric and Vacuum Distillation
- Catalytic Reforming and Isomerization
- Crude Characterization and Laboratory Testing
- Fluid Catalytic Cracking (FCC)
- Fuel Specifications and Blending
- Hydrocracking and Delayed Coking
- Hydrotreating
- Introduction to Petroleum Refining
- Mentoring: Optimizing a Process Unit
- Refinery Planning and Economics
- Utilities: Steam, Water and Power
Maintenance, Inspection and Integrity
- Applying ISO 14224 to Data Management
- Asset Management Fundamentals (ISO 55001)
- Criticality Analysis (CA)
- Failure Data Analysis and Weibull
- Integrating Maintenance with Asset Management (EN 16646)
- Introduction to Operational Reliability
- Maintenance Fundamentals in Oil and Gas
- Maintenance Management and Measurement with KPIs
- Maintenance Planning and Scheduling
- Mapping Administrative and Operational Processes
- Mechanical Integrity
- Mentoring: Implementing a Reliability Plan
- Non-Destructive Testing for Supervisors
- Plant Turnaround Management
- Reliability Centered Maintenance (RCM)
- Risk Based Inspection (RBI)
- Root Cause Analysis (RCA)
- Vibration Analysis and Predictive Maintenance
Data Science and AI
- Advanced Data Interpretation in Reservoir Engineering
- Automation and Digitalization of Oilfield Operations
- Data Science Techniques for Well Performance Prediction
- Data Science Workflows for Artificial Lift, Production and Facilities Engineers
- Data Science, AI and Machine Learning for Oil and Gas
- Drilling Automation
- Drilling Data Science and AI with Python
- Introduction to Petrophysical Data Science and AI with Python
- Machine Learning for Geosciences
- Machine Learning Workflows for Unconventional Petroleum
Safety, Environment and Energy Transition
- Accident Investigation
- Arc Flash Protection and Industrial Electrical Safety
- ATEX Regulations and Hazardous Area Classification in Industry
- Behavior-Based Safety (BBS) Management
- Confined Space Safety
- Consequence Analysis and Risk Scenario Modeling
- Continuous Improvement Strategies in Industrial Safety
- Control of Hazardous Energy: LOTO (Lockout/Tagout)
- Emergency Brigades and Crisis Management in Industrial Plants
- Emergency Drill Execution and Response Planning
- Emissions Management and Methane Venting
- Energy Transition
- Environmental Impact
- Environmental Management Systems (ISO 14001)
- Ergonomics and Injury Prevention in the Workplace
- Evacuation and Rescue in High-Risk Environments
- Fire and Explosion Prevention and Control in Industrial Plants
- First Aid and CPR in Industrial Environments
- Functional Safety and Safety Integrity Level (SIL) in Industrial Processes
- Fundamentals of Process Safety
- Hazard Identification and Risk Assessment
- Hazardous Waste and Toxic Substance Management
- Human Reliability
- Implementation of Behavior-Based Safety Programs (BBS)
- Industrial Safety Audits and Certification
- Leadership Development in Safety: Culture and Communication
- Lightning Protection and Grounding Systems (NFPA 780, IEC 62305, IEEE Std 80)
- Lightning Protection in Industrial and Energy Facilities
- Major Incident Management and Hydrocarbon Spill Response
- Management of Change in Industrial Processes (MOC)
- Mentoring: Leading an HSE Program
- Occupational Health and Safety Management System (ISO 45001)
- Prevention and Control of Explosive Atmospheres (ATEX, NFPA 70, IEC 60079)
- Regulations and Standards in Process Safety
- Risk Analysis in Industrial Processes (PHA, HAZOP, HAZID, LOPA)
- Safe Handling of Equipment and Operations in Explosive Atmospheres
- Safety Audits and Inspections in Industrial Facilities
- Safety in Explosives Handling for Oilfield and Mining Operations
- Safety in Exposure to Hydrogen Sulfide (H₂S) and Toxic Gases
- Safety in Exposure to Ionizing and Non-Ionizing Radiation
- Safety in Hot Work, Welding, and Cutting Operations (Hot Work Permit)
- Safety in Industrial Construction and Assembly
- Safety in Industrial Maintenance and Asset Management
- Safety in Natural Gas and LNG Facilities
- Safety in the Chemical and Petrochemical Industry
- Safety in the Food and Beverage Industry
- Safety in the Green Hydrogen and Fuel Cell Industry
- Safety in the Handling and Storage of Industrial Gases
- Safety in the Handling and Storage of Lithium Batteries and Energy Systems
- Safety in the Handling and Transport of Hazardous Materials
- Safety in the Management of Industrial and Hazardous Waste
- Safety in the Mining Industry: Surface and Underground Operations
- Safety in the Operation of Pressure Equipment and Piping
- Safety in the Renewable Energy Industry (Wind, Solar, Green Hydrogen)
- Safety in the Use and Handling of Lifting Equipment and Cranes
- Safety in Vehicle Operation and Personnel Transportation
- Safety in Water and Industrial Waste Treatment Plants
- Safety Training Impact Measurement in Industrial Environments
- Standards for Lightning Protection and Grounding Systems
- Working at Heights and Fall Protection Safety
Leadership and Organizational Development
- Aligning Work Teams with Corporate Strategy
- Communication for Decision Making
- Competency Management and Learning Paths
- Corporate Leadership and Delegation
- Critical Knowledge Management and Succession
- Emotional Intelligence for Business Effectiveness
- Internal Mentoring Skills in Organizations
- Leadership and Effective Coordination
- Learning Habits in Work Teams
- Managing Roles and Responsibilities in Work Teams
- Mentoring: Leadership Development Program
- Organizational Change Management
- Skills for Coordinating Specialists
- Strategic Uses of Power in Organizations
- Team Building for Project Management
- The Role of Internal Consulting in Organizations
- Workflow and Team Productivity
No courses match your search.
Prefer a complete program by position?
We build the path for each position in your company from the maps, with assessment and certification.