In-house course Drilling and Completion
Slurry Design, Centralization and Displacement Simulation
For your team · date and location to be agreed
- 16 hours
- On site or online
- For your team
About the course
Technical criteria for reviewing and approving a cement job design. It develops slurry and additive properties, reading laboratory tests (thickening time, compressive strength, free water, fluid loss) and the design of centralization and spacers to achieve good displacement. Participants will review a service proposal with simulation and check ECD against the operating window.
Objectives
Design slurries, centralization and displacement for good zonal isolation.
Who should attend
Drilling and cementing engineers.
Course base program
Reference program: before delivery we adjust content, depth and duration with your team.
Module 1
Slurries
Design and testing.
- Additives and properties
- Laboratory tests
- Lightweight and high-density slurries
Module 2
Centralization
Standoff and eccentricity.
- Standoff calculation
- Centralizer types
- Deviated and horizontal wells
Module 3
Displacement
Simulation and execution.
- Spacers and washes
- Displacement simulation
- Job control
How an in-house course works
- Needs reviewWe talk with your technical team and HR about objectives, profiles and the level of the group.
- Program adjustmentWe adapt modules, exercises and duration to your operation, using your company data and cases if you wish.
- DeliveryAt your facilities or live online, on the dates you choose, for your team only.
- Close-outParticipant assessment, certificates and a final report for your company.
Looking for an open date to enroll individually? See the open course calendar →